eth bridge filter ifdel
Remove an interface from a filter.
SYNTAX:
eth bridge filter ifdel
where:
brname
name
intf
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
brname = <{bridge}>
name = <{}>
intf = <{OBC|ethport1|ethport2|ethport3|
ethport4|WLAN|virt}>
The name of an bridge.
The name of the filter to configure.
The name of the bridge interface to remove.
ETH COMMANDS
REQUIRED
REQUIRED
REQUIRED
321