UPNP COMMANDS
upnp debug nonce
To re-generate the nonce string.
SYNTAX:
upnp debug nonce
where:
type
Add a user.
SYNTAX:
upnp debug nonce
where:
name
password
role
hash2
crypt
descr
defuser
defremadmin
deflocadmin
800
[type = <{upnp|tr64|wfa}>]
Add a user. = <{upnp|tr64|wfa}>
Specify device type for nonce stringCommand: user add
Syntax : add name = <string> password = <password> role = <>
[hash2 = <string>] [crypt = <string>] [descr = <quoted string>]
[defuser = <{disabled|enabled}>] [defremadmin = <{disabled|
enabled}>] [deflocadmin = <{disabled|enabled}>]
name = <string>
password = <password>
role = <>
[hash2 = <string>]
[crypt = <string>]
[descr = <quoted string>]
[defuser = <{disabled|enabled}>]
[defremadmin = <{disabled|enabled}>]
[deflocadmin = <{disabled|enabled}>]
User name.
User password.
Role name.
The MD5 hash.
The crypt password.
User description.
Set this user as the default user.
Set this user as the default remote administrator.
Set this user as the default local administrator.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
OPTIONAL
REQUIRED
REQUIRED
REQUIRED
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL