Technicolor MediaAccess TC8715D Quick Installation Manual
  1. Manuals
  2. Brands
  3. Technicolor Manuals
  4. Wireless Router
  5. MediaAccess TC8717T
  6. Quick installation manual

Technicolor MediaAccess TC8715D Quick Installation Manual

Hide thumbs
1
2
3
4
5
6

Advertisement

Table of Contents

QUICK INSTALLATION GUIDE
MediaAccess TC8715D

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MediaAccess TC8715D and is the answer not in the manual?

Questions and answers

Related Manuals for Technicolor MediaAccess TC8715D

Summary of Contents for Technicolor MediaAccess TC8715D

  • Page 1 QUICK INSTALLATION GUIDE MediaAccess TC8715D...

  • Page 2: Setup Procedure

    1 GETTING STARTED Check the box contents Your box should contain the following items: This Quick Installation Guide  One Safety Instructions and Regulatory Notices booklet  One MediaAccess Gateway (TC8715D)  One power cord  One Ethernet cable (RJ-45) ...
  • Page 3 2 SETUP 2.1 Connect the MediaAccess Gateway to the MoCA/Cable network Proceed as follows: 1 Make sure that one end of the coaxial cable is correctly connected to your cable splitter or coaxial wall jack. 2 Connect the other end of the coaxial cable to the MoCA/Cable port of the MediaAccess Gateway.
  • Page 4 2.3 Connect your wireless devices to the MediaAccess Gateway If you prefer to make a wired connection to your MediaAccess Gateway, proceed with “2.4 Connect your wired (Ethernet) devices to the MediaAccess Gateway” on page The MediaAccess Gateway access points The MediaAccess Gateway has two access points that allows you to connect wireless devices to your home network: The 2.4 GHz access point allows you to connect IEEE802.11n/g/b wireless clients and offers the best...
  • Page 5 4 The MediaAccess Gateway is now exchanging the security settings. 5 After some time your wireless client prompts you that it is now connected to the MediaAccess Gateway. You are now connected to the MediaAccess Gateway network. Troubleshooting If you are having trouble connecting your wireless client via WPS, this may be caused by one of the following reasons: WPS cannot be correctly executed: ...

  • Page 6: Configure The Mediaaccess Gateway

    1 Make sure that the MediaAccess Gateway is turned on. 2 Use a pen or an unfolded paperclip to push the recessed Reset button on the back panel of the Technicolor Gateway for at least 15 seconds and then release it. 3 The MediaAccess Gateway restarts.

This manual is also suitable for:

Mediaaccess tc8717t

Table of Contents