System Ra Config - Technicolor TG582n Cli Reference Manual

SYSTEM COMMANDS

system ra config

Configure remote access parameters.
SYNTAX:
system ra config
where:
name
state
secure
port
timeout
mode
ipintf
randompassword
randomport
group
user
todschedule
systemservice
770
name = <{}>
[state = <{disabled|enabled}>]
[secure = <{enabled|disabled}>]
[port = <{enabled|disabled}>]
[timeout = <led|disabled}>]
[mode = <{Permanent|Temporary|Schedule}>]
[ipintf = <string>]
[randompassword = <{enabled|disabled}>]
[randomport = <{enabled|disabled}>]
[group = <string>]
[user = <string>]
[todschedule = <string>]
[systemservice = <{GUI|webservice}>]
Instance name
Enable/disable RAD.
Use secure mode (https).
The port number.
The timeout value.
Mode Permanent or Temporary.
The name of the xref to the IP interface.
Create a random password.
Use a random port.
The name of the xref to the group keypath.
The name of the xref to the user keypath.
The name of the xref to the ToD schedule.
The system service type.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL