WIRELESS COMMANDS
wireless wps mode
Set/Show the configuration mode value
SYNTAX:
wireless wps mode
where:
ssid_id
radio_id
state
Displays status information about
modem
SYNTAX:
wireless wps mode
where:
expand
g.997.1
counter_period_filter
counters_reset
852
[ssid_id = <number{0-9999}>]
[radio_id = <number{0-9999}>]
[state = <{unconfigured|configured}>]
Displays status information about modem =
<{unconfigured|configured}>
ssid id
radio
configuration modeCommand: xdsl info
Syntax : info [expand = <{disabled|enabled}>] [g.997.1 =
<{disabled|enabled}>] [counter_period_filter = <{current|
15_minutes|24_hours}>] [counters_reset = <{no|yes}>]
[expand = <{disabled|enabled}>]
[g.997.1 = <{disabled|enabled}>]
[counter_period_filter = <{current|15_minutes|
24_hours}>]
[counters_reset = <{no|yes}>]
Condensed / Expanded listing link information
Condensed / Expanded listing link information
Specify the statistics period
Reset all counters
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
OPTIONAL
OPTIONAL
OPTIONAL
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL