sntp debug traceconfig
Modify SNTP client trace configuration
SYNTAX:
sntp debug traceconfig
where:
state
Displays the software version.
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
[state = <{disabled|enabled}>]
Displays the software version. = <{disabled|
enabled}>
Enable/Disable tracing.Command: software version
Syntax : version
SNTP COMMANDS
OPTIONAL
REQUIRED
739