dhcp client ifconfig
Configure a DHCP client.
SYNTAX:
dhcp client ifconfig
where:
intf
label
metric
dnsmetric
broadcast
serverroute
followlabel
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
intf = <>
[label = <{None|DSCP|Interactive|Management|
Video|VoIP-RTP|VoIP-Signal|default}>]
[metric = <number{0-255}>]
[dnsmetric = <number{0-100}>]
[broadcast = <{disabled|enabled}>]
[serverroute = <{disabled|enabled}>]
[followlabel = <{disabled|enabled}>]
The name of the dynamic interface to be configured.
Label for default gateway and static routes.
Route metric for default gateway and static routes.
DNS route metric.
Operate client in unicast/broadcast mode.
Insert a route for the DHCP server IP
If enabled the DHCP client's unicast traffic will follow the
route label specified. If disabled DHCP unicast traffic will
follow standard routes
DHCP COMMANDS
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
123