Ptrace Filter Modify - Technicolor TG582n Cli Reference Manual

ptrace filter modify

Modify a filter
SYNTAX:
ptrace filter modify
where:
name
intf
Modify/Display ECO-manager
configuration
SYNTAX:
ptrace filter modify
where:
eco-manager
cpu-microsleep
cpu-lowspeed
usb-controller
wlan-pwrcontrol
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
name = <>
intf = <{bridge|OBC|ethport1|RELAY|ethport2|
ethport3|ethport4|WLAN|virt|ethoa_8_35}>
Modify/Display ECO-manager configuration =
<{bridge|OBC|ethport1|RELAY|ethport2|ethport3|
ethport4|WLAN|virt|ethoa_8_35}>
Filter name
Interface on which to trace framesCommand: pwr config
Syntax : config [eco-manager = <{disabled|enabled}>]
[cpu-microsleep = <{disabled|enabled}>] [cpu-lowspeed =
<{disabled|enabled}>] [usb-controller = <{disabled|enabled}>]
[wlan-pwrcontrol = <{disabled|enabled}>]
[eco-manager = <{disabled|enabled}>]
[cpu-microsleep = <{disabled|enabled}>]
[cpu-lowspeed = <{disabled|enabled}>]
[usb-controller = <{disabled|enabled}>]
[wlan-pwrcontrol = <{disabled|enabled}>]
(Enables / Disables the ECO-manager).
(Allows the CPU to use low power instructions).
(Allows the CPU to adjust its internal clock).
(Enables / Disables the USB-Controller)
(Enables / Disables Wireless LAN (WLAN) power control).
PTRACE COMMANDS
REQUIRED
REQUIRED
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
699