Connection Bind - Technicolor TG582n Cli Reference Manual

CONNECTION COMMANDS

connection bind

Create a CONN/NAT application helper/port binding.
SYNTAX:
connection bind
where:
application
port
72
application = <{IP6TO4|PPTP|ESP|IKE|SIP|
JABBER|CU/SeeMe|RAUDIO(PNA)|RTSP|SNMP_TRAP|
FTP}>
[port = <port-range>]
The name of a CONN/NAT application helper as listed by
':connection applist'.
The port number or range this application handler should
work on.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
REQUIRED
OPTIONAL