CONNECTION COMMANDS
connection appinfo
Display CONN/NAT application specific info
SYNTAX:
connection appinfo
where:
application
70
application = <{IP6TO4|PPTP|ESP|IKE|SIP|
JABBER|CU/SeeMe|RAUDIO(PNA)|RTSP|SNMP_TRAP|
FTP}>
The name of a CONN/NAT application helper as listed by
':connection applist'.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
REQUIRED