SYSLOG COMMANDS
syslog msgbuf flush
Flush all messages in syslog message buffer.
SYNTAX:
syslog msgbuf flush
where:
date
time
timezone
daylightsaving
geotimezonename
rtc
758
[date = <dd/mm/yyyy>]
[time = <hh:mm:ss>]
[timezone = <(+ or -)hh:mm>]
[daylightsaving = <{disabled|enabled}>]
[geotimezonename = <{(UTC-12:00)|(UTC-11:00)|
(UTC-10:00)|(UTC-09:00)|(UTC-(UTC-03:30)|
(UTC-03:00)|(UTC-02:00)|(UTC-01:00)|(UTC)|(UTC
+01:00)|(UTC+02:00)|(UTC+03:00)|(UTC+03:30)|
(UTC+04:00)|(UTC+04:30)|(UTC+05:00)|(UTC
+05:30)|(UTC+05:45)|(UTC+06:00)|(UTC+06:30)|
(UTC+07:00)|(UTC+08:00)|(UTC+09:00)|(UTC
+09:30)|(UTC+10:00)|(UTC+11:00)|(UTC+12:00)|
(UTC+13:00)}>]
[rtc = <{disabled|enabled}>]
Set the system date
Set the system time
Set the system timezone(-12:00...+14:00 / 15 minute
resolution)
Enable/Disable daylight saving
Set the geographical timezone by name
Enable/Disable the real time clock
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL