Ip Auto Ifconfig - Technicolor TG582n Cli Reference Manual

IP COMMANDS

ip auto ifconfig

Configures an autoIP interface.
SYNTAX:
ip auto ifconfig
where:
intf
addr
poolstart
poolend
netmask
claim
defence
probe
interval
514
intf = <>
[addr = <ip-address>]
[poolstart = <ip-address>]
[poolend = <ip-address>]
[netmask = <ip-mask(dotted or cidr)>]
[claim = <number{0-65535}>]
[defence = <number{0-65535}>]
[probe = <number{0-65535}>]
[interval = <number{1-65535}>]
The name of the autoIP interface to configure.
The preferred link-local IP address.
The start IP address of the link-local address pool.
The end IP address of the link-local address pool.
The netmask of the link-local IP address pool.
The number of link-local address selection retries before
giving up.
The number of times the link-local address is defended
before releasing the address.
The number of ARP probes to be sent before accepting a
link-local address.
The time interval between two ARP probe transmissions.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL