Mbus Client Register - Technicolor TG582n Cli Reference Manual

MBUS COMMANDS

mbus client register

Register cli client to mbus
SYNTAX:
mbus client register
where:
dmtree
type
dlink
mbusd_addr
refresolv
state_events
592
[dmtree = <{igd|atomic|system}>]
[type = <{indexpath|keystrpath}>]
[dlink = <{local_ipc|remote_inet}>]
[mbusd_addr = <quoted string>]
[refresolv = <{disabled|enabled}>]
[state_events = <{disabled|enabled}>]
Select mbusd datamodel tree.
Path type (default = indexpath)
Daemon link (default = local_ipc)
Daemon address (ip addr for inet)
Use reference resolving (default=disabled)
Context should be notified when the MBus state changes
(default=disabled)
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL