Dhcp Server Pool Config - Technicolor TG582n Cli Reference Manual

dhcp server pool config

Configure a DHCP server pool
SYNTAX:
dhcp server pool config
where:
name
state
allocation
intf
index
poolstart
poolend
netmask
gateway
server
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
name = <{LAN_private}>
[state = <{disabled|enabled}>]
[allocation = <{dynamic|automatic}>]
[intf = <{Internet|LocalNetwork}>]
[index = <number>]
[poolstart = <ip-address>]
[poolend = <ip-address>]
[netmask = <ip-mask(dotted or cidr)>]
[gateway = <ip-address|0|none>]
[server = <ip-address|none>]
[primdns = <ip-address|none>]
[secdns = <ip-address|none>]
[primwins = <ip-address|none>]
[secwins = <ip-address|none>]
[leasetime = <number{0-1814400}>]
[renewtime = <number{0-1814400}>]
[rebindtime = <number{0-1814400}>]
[lockouttime = <number{0-1814400}>]
[unnumbered = <{disabled|enabled}>]
[localgw = <{disabled|enabled}>]
[localdns = <{disabled|enabled}>]
The name of the DHCP server pool.
Enable/Disable the DHCP server pool admin state.
Define the DHCP Server's pool allocation method (tip :
automatic means the IP address becomes reserved for the
lease).
The interface for which the pool is allowed to lease IP
addresses.
The number of the pool before which you want the new
pool to be added.
The DHCP server pool start IP address.
The DHCP server pool end IP address.
The DHCP server pool netmask.
The IP address of the default router for DHCP clients.
The IP address of the DHCP server for DHCP clients.
DHCP COMMANDS
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
175