ETH COMMANDS
eth bridge filter ifadd
Connect an interface with a filter.
SYNTAX:
eth bridge filter ifadd
where:
brname
name
intf
320
brname = <{bridge}>
name = <{}>
intf = <{OBC|ethport1|ethport2|ethport3|
ethport4|WLAN|virt}>
The name of an bridge.
The name of the filter to configure.
The name of the bridge interface to add.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
REQUIRED
REQUIRED
REQUIRED