Ppp Commands - Technicolor TG582n Cli Reference Manual

ppp Commands

ppp flush
ppp ifattach
ppp ifconfig
ppp ifdelete
ppp ifdetach
ppp iflist
ppp ifscan
ppp relay flush
ppp relay ifadd
ppp relay ifconfig
ppp relay ifdelete
ppp relay iflist
ppp relay sesslist
ppp rtadd
ppp rtdelete
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
Flush all PPP interfaces.
Attach a PPP interface.
Modify a PPP interface.
Delete a PPP interface.
Detach a PPP interface.
Display the PPP interfaces.
Scan a PPP interface for available interfaces.
Remove all ethernet interfaces from the PPP
relay agent list and terminate all
Add an ethernet interface to the PPP relay list.
Modify an ethernet interface from the PPP relay
agent list.
Delete an ethernet interface from the PPP relay
agent list.
Display all ethernet interfaces added to the PPP
relay agent list.
Display all active PPP relay sessions.
Add a route to the routing table when PPP link
comes up.
Delete the route for a PPP link.
PPP COMMANDS
see page 660
see page 661
see page 662
see page 665
see page 666
see page 667
see page 668
see page 669
see page 670
see page 671
see page 672
see page 673
see page 674
see page 675
see page 676
659