MOBILE COMMANDS
mobile ifconfig
Configure an Mobile interface.
SYNTAX:
mobile ifconfig
where:
intf
pin
puk
apn
mode
operator
technology
initcommand
642
intf = <>
[pin = <password>]
[puk = <string>]
[apn = <string>]
[mode = <{automatic|manual}>]
[operator = <number{0-99999}>]
[technology = <{2G|3G}>]
[initcommand = <string>]
The name of the Mobile interface to configure.
PIN code.
PUK code.
Access Point Name.
Operator selection ( automatic, manual).
Location area indentifier + network code.
Radio access technology ( 2G, 3G).
AT command executed after SIM verification.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL