IP COMMANDS
ip debug traceconfig
Display/Modify IP stack trace configuration.
SYNTAX:
ip debug traceconfig
where:
input
forward
output
drop
path
mode
arp
522
[input = <{none|label|-telnet|-host|-
broadcast|all}>]
[forward = <{none|label|-telnet|-host|-
broadcast|all}>]
[output = <{none|label|-telnet|-host|-
broadcast|all}>]
[drop = <{none|label|-telnet|-host|-broadcast|
all}>]
[path = <{none|label|-telnet|-host|-broadcast|
all}>]
[mode = <{line|dump}>]
[arp = <{none|all}>]
Define the packets that will be traced.
Define the packets that will be traced.
Define the packets that will be traced.
Define the packet drops that will be traced.
Define the packet that will be path-traced.
Packet dump method.
Define the arp packets that will be traced.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL