Dsd Intercept Config - Technicolor TG582n Cli Reference Manual

DSD COMMANDS

dsd intercept config

Display/modify HTTP Intercept configuration
SYNTAX:
dsd intercept config
where:
WDSpoofedIP
servertimeout
connecterrorurl
categoryerrorurl
monitorintercepturl
unauthorizedrequrl
imageredirect
imageredirecturl
alwaysuseip
228
[WDSpoofedIP = <ip-address>]
[servertimeout = <number>]
[connecterrorurl = <string>]
[categoryerrorurl = <string>]
[monitorintercepturl = <string>]
[unauthorizedrequrl = <string>]
[imageredirect = <{disabled|enabled}>]
[imageredirecturl = <string>]
[alwaysuseip = <{disabled|enabled}>]
IP address indicating unavailable WAN connection.
Server timeout for redirect action
Destination url when connection to server failed
Destination url when connection to category server failed
Destination url when request is intercepted by monitor
thread
Destination url when requested url is blocked by some rule
or setting
Enable/disable substituting blocked images
URL of image used when substituting blocked images
Always use ip address when redirecting to a local page
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL