Ppp Rtadd - Technicolor TG582n Cli Reference Manual

ppp rtadd

Add a route to the routing table when PPP link comes up.
SYNTAX:
ppp rtadd
where:
intf
dst
dstmsk
label
src
srcmsk
metric
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
intf = <{Internet}>
dst = <ip-address>
[dstmsk = <ip-mask(dotted or cidr)>]
[label = <{None|DSCP|Interactive|Management|
Video|VoIP-RTP|VoIP-Signal|default}>]
[src = <ip-address>]
[srcmsk = <ip-mask(dotted or cidr)>]
[metric = <number{0-100}>]
The name of a PPP interface.
The IP destination address specification for the route to be
added when the link comes up.
The IP destination mask. Special values : 1 = remote net; 32 =
remote host;
The name of the label.
The IP source address specification. i.e. who can use this
link.
The IP source mask.
The route metric.
PPP COMMANDS
REQUIRED
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
675