eth bridge xtratag config
Configure an extra tag mapping entry.
SYNTAX:
eth bridge xtratag config
where:
brname
intf
innervid
outervid
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
[brname = <{bridge}>]
intf = <{OBC|ethport1|ethport2|ethport3|
ethport4|WLAN|virt}>
innervid = <{[1-4094]|all|}>
outervid = <{[1-4094]|notag|transparent|}>
The name of a bridge instance.
The name of the bridge interface.
The inner VLAN id [all,1-4094] (all = all inner vid will be
translated to the outer vid).
The outer VLAN id [notag,1-4094,transparent] (notag:
outer not tagged, transparent: tagged as inner).
ETH COMMANDS
OPTIONAL
REQUIRED
REQUIRED
REQUIRED
357