Connect The Lamp Power Supply (Lps) - Christie CP4230 User Manual

7. Install the lamp. See

2.14 Connect the Lamp Power Supply (LPS)

connected to the cathode lead and the red (+) power cable must be connected to the anode
lead. Reversing the connections can damage the cinema projector.
WARNING
WARNING
safety. Never compromise safety by returning the current through the ground. 3) Connect
ground FIRST to reduce shock hazard.
WARNING
WARNING
rubbing against the LPS knockout plate and becoming damaged.
CP4230 User Manual
020-100621-03 Rev. 1 (05-2014)
Section 7.9 Replace the Lamp
When connecting the LPS and the Igniter, the black (-) power cable must be
Connect the LPS to the cinema projector before you connect it to AC power.
1) Certified electrician required. 2) Ground (earth) connection is necessary for
Use a strain relief connector on the AC supply cable to prevent the cable from
Section 2: Installation and Setup
for lamp replacement instructions.
2-15