Husqvarna 2013 TC 250R Workshop Manual page 337

TE 250R - 310R 2013 I.E. / TE 310R 2013 I.E. USA
NOTE: Unless otherwise specified, standard torque values for the different thread sizes are as follows (+/- 5%)
Steel screws on plastic, with metal spacers
Steel screws on brass, copper, aluminium
Steel screws on iron, steel
Steel screws on plastic, with metal spacers
Steel screws on brass, copper, aluminium
Steel screws on iron, steel
Steel screws on plastic, with metal spacers
Steel screws on brass, copper, aluminium
Steel screws on iron, steel
Steel screws on brass, copper, aluminium
Steel screws on iron, steel
Steel screws on iron, steel
Steel screws on iron, steel
Steel screws on iron, steel
Workshop Manual Ed. 07-2012
TIGHTENING TORQUE FIGURES
TC 250R 2013 - TC 250R 2013 I.E. USA
TXC 250R - 310R 2013 I.E. USA
M4
M4
M4
M5
M5
M5
M6
M6
M6
M8
M8
M10
M12
M14
2 Nm 0.2 Kgm
2 Nm 0.2 Kgm
3 Nm 0.3 Kgm
4 Nm 0.4 Kgm
4 Nm 0.4 Kgm
6 Nm 0.6 Kgm
6.5 Nm 0.65 Kgm
6.5 Nm 0.65 Kgm
10.5 Nm 1 Kgm
16 Nm 1.6 Kgm
26 Nm 2.6 Kgm
52 Nm 5.2 Kgm
100 Nm 10 Kgm
145 Nm 14.5 Kgm
X.10
1.45 ft/lb
1.45 ft/lb
2.2 ft/lb
3 ft/lb
3 ft/lb
4.4 ft/lb
4.8 ft/lb
4.8 ft/lb
7.7 ft/lb
11.8 ft/lb
19.1 ft/lb
38.3 ft/lb
73.8 ft/lb
107 ft/lb