Input Shaft (6 Speed) - Husqvarna 2013 TC 250R Workshop Manual

TE 250R - 310R 2013 I.E. / TE 310R 2013 I.E. USA
Workshop Manual Ed. 07-2012
ENGINE REASSEMBLY
TC 250R 2013 - TC 250R 2013 I.E. USA
TXC 250R - 310R 2013 I.E. USA

Input shaft (6 SPEED)

Fit roller cage (1) and 5th gear (2) on the bushing and then install the washer
(3) and the retaining ring (4). The washer must be placed between gear and
retaining ring. Fit 3rd/4th gear (5), retaining ring (6) and washer (7).
Fit the roller cage (8).
Fit 6th gear (9).
Fit 2nd gear (10).
Fit the circlip (11).
B: with 5th gear engaged and 5th gear in contact with 1st gear.
C: with 4th gear in contact with 6th gear.
(1.4448 - 1.4251 in.)
(1.9669 - 1.8228 in.)
H.20