Crankshaft Disassembly - Husqvarna 2013 TC 250R Workshop Manual

TE 250R - 310R 2013 I.E. / TE 310R 2013 I.E. USA
Workshop Manual Ed. 07-2012
ENGINE DISASSEMBLY
TC 250R 2013 - TC 250R 2013 I.E. USA
TXC 250R - 310R 2013 I.E. USA

Crankshaft disassembly

- Slide the puller (1) (part no. 8000 A7015) over the right end of the crankshaft.
- Secure the puller to the crankcase half and remove the crankshaft (2) from
the opposite side.
In case crankshaft and/or connecting rod are worn it is necessary
to replace the whole crankshaft assembly and the connecting rod.
F.38