Husqvarna 2013 TC 250R Workshop Manual page 120

TE 250R - 310R 2013 I.E. / TE 310R 2013 I.E. USA
5
4
Workshop Manual Ed. 07-2012
ENGINE DISASSEMBLY
TC 250R 2013 - TC 250R 2013 I.E. USA
TXC 250R - 310R 2013 I.E. USA
- Place the wormshaft (4) assembly in a vice with aluminium jaws, loosen the
nut (5) using a 10 mm T-wrench and slide out the wormshaft (4).
Upon reassembly of the locking nut (5), fit the washer (9) in the right
position and tighten the nut (5) to a torque of 8 Nm - 0.8 Kgm - 5.90
ft-lb + Loctite 270.
12
11
H00772
- Remove the freewheel (6).
- Remove the needle roller bearing (7) and the thrust ring (8).
5
F.30
13
9
H11258
14