TE 250R - 310R 2013 I.E. / TE 310R 2013 I.E. USA
1
2
3
Workshop Manual Ed. 07-2012
GENERAL PROCEDURES
TC 250R 2013 - TC 250R 2013 I.E. USA
TXC 250R - 310R 2013 I.E. USA
Saddle removal
-
Turn the rear fixing (1) counter clockwise and remove the saddle.
1
H10001
Side panel removal
-
Remove the saddle as described in the relevant paragraph.
1
-
Loosen the retaining screws (1) and remove the side panels (2) and (3).
H10002
Battery removal (TE-TCX)
-
Remove the saddle as described in the relevant paragraph.
-
First remove the BLACK negative cable (8 mm Allen wrench), then the RED
positive cable (when reassembling, first connect the RED positive cable, then
the BLACK negative cable); remove the battery (1) from its housing.
E.4