Husqvarna 2013 TC 250R Workshop Manual page 223

TE 250R - 310R 2013 I.E. / TE 310R 2013 I.E. USA
TC 250R 2013 - TC 250R 2013 I.E. USA
TXC 250R - 310R 2013 I.E. USA
H10057
H10058
H10059
H10060
FRONT SUSPENSION
Loosen the cap nut at the top of each outer tube.
(Note: it is good practice to moderately slacken the cap nuts before removing
the fork legs from the motorcycle).
Loosen the fork cap nut and the nut with a wrench.
Remove top cap nut, spring retainer, spring and rebound adjuster rod.
Drain the oil.
Pump the piston rod up and down to drain oil from the cylinder.
I.19
Workshop Manual Ed. 07-2012