Shock Absorber Compression And Rebound Damping Adjustment; Shock Absorber Springs - Husqvarna 2013 TC 250R Workshop Manual

TE 250R - 310R 2013 I.E. / TE 310R 2013 I.E. USA
_
3
_
4
Workshop Manual Ed. 07-2012
SETTINGS AND ADJUSTMENTS
TC 250R 2013 - TC 250R 2013 I.E. USA
TXC 250R - 310R 2013 I.E. USA

Shock absorber compression and rebound damping adjustment

Adjustment of the compression stroke is independent from the rebound stroke.
A) COMPRESSION - Standard setting:
1) Low damping speed:
+
- TE: 14 clicks;
- TC - TXC: 12 clicks;
- TC 250 USA: 10 clicks.
1
(adjuster 1)
2) High damping speed:
- TE: 1+1/2 turns;
- TC - TXC: 1+1/4 turns.
H09083
(adjuster 3)
To reset the standard setting, turn upper adjusters (1) and (3) clockwise until
reaching fully closed position. Then turn them back the number of clicks / turns
specified above.
In order to obtain a smooth braking efficiency, turn the adjusters counter clock-
wise. Vice versa to obtain a harder braking action.
B) REBOUND - Standard setting:
- 10 clicks (+1 / -2 clicks)
To reset the standard setting, turn lower adjuster (2) clockwise until reaching
fully closed position. Then turn it back by the mentioned clicks.
+
In order to obtain a smooth braking action, turn the adjuster counter clockwise.
Vice versa to obtain a harder braking action.
2
H09084
H09085

Shock absorber springs (4)

STANDARD
K=5,2 kg/mm (TC - TXC)
K=5,2 - 5,8 kg/mm (TE)
H09086
D.26