Husqvarna 2013 TC 250R Workshop Manual page 230

FRONT SUSPENSION
TE 250R - 310R 2013 I.E. / TE 310R 2013 I.E. USA
TC 250R 2013 - TC 250R 2013 I.E. USA
TXC 250R - 310R 2013 I.E. USA
Fit collar bushing, O-ring, spring guide and nut onto piston rod.
Insert the rebound adjuster rod into the piston rod.
Make sure that at least an 18 mm (0.71 in.) portion of the rebound adjuster rod
protrudes from the piston rod.
H06886
Fill the damper unit with the specified quantity of oil (674 cm - 41,13 in ).
3 3
Slowly pump the piston rod up and down to help oil reach all points of the cartridge.
Note: if you haven't drained all oil from the damper unit on disassembly, follow
the procedure outlined below (Filling oil to specified level).
Filling oil to specific level
H06887
Workshop Manual Ed. 07-2012
I.26