Relay Test (Te - Txc) - Husqvarna 2013 TC 250R Workshop Manual

TE 250R - 310R 2013 I.E. / TE 310R 2013 I.E. USA
TC 250R 2013 - TC 250R 2013 I.E. USA
TXC 250R - 310R 2013 I.E. USA
1
H11414
ELECTRICAL SYSTEM

Relay test (TE - TXC)

Remove saddle and fuel tank as described in "Section E". Remove the relays
(1) located on the R.H. side of the chassis.
A: Set the meter to the "Impedance" scale and check the energiser coil for
proper operation. Reading should be: 80 Ohm (+/- 10%) at 20 °C.
B: Set the meter to "Continuity" mode and check the circuit is open.
C: Feed the coil from a power supply unit with stable 12V output and make
sure that the circuit closes.
LOWER VIEW
M.35
Workshop Manual Ed. 07-2012