Set Mode Items - Icom IC-M25 Instruction Manual

7
SET MODE

Set mode items

❏ Beep Tone function
Turn the key touch beep sound ON or OFF.
• OFF: For silent operation.
• ON: A beep sounds when a key is pushed.
Key touch beep is ON
(default)
❏ Weather Alert function
(For USA, EXP, CHN and AUS versions)
When this function is turned ON and the transceiver detects
a weather alert tone, the "WX
sounds. (The blinking stops when another key is pushed.)
The currently selected weather channel is monitored even
while receiving another channel (when the Power Save
function is ON) or during a scan.
Weather alert is OFF
(default)
18
"bEEP"
Push
Key touch beep is OFF
"ALrt"
" icon blinks and a beep
Push
Weather alert is ON
FELLECS-TECH | inbox@fellecs-tech.com | www.fellecs-tech.com
❏ Priority Scan function
(Except for the NLD version)
The transceiver has 2 scan types — "Normal" and "Priority."
• OFF: A normal scan, which searches all Favorite channels
in the selected channel group.
• ON: A priority scan, which sequentially searches all
Favorite channels while monitoring Channel 16.
Normal scan (default*)
*Default value differs, depending on the transceiver version.
❏ Scan resume timer
(Except for the NLD version)
Select a scan resume timer option.
• OFF: When a signal is received, the scan pauses on the
channel until the signal disappears.
• ON: When a signal is received, the scan pauses on the
channel for 5 seconds, and then resumes.
Push
Scan resume timer OFF
(default)
"Prio"
Push
Priority scan
"S_ti"
Scan resume timer ON