Busy Lockout - Icom IC-92A Instruction Manual

D PTT lock
Turns the PTT lock function ON and OFF.
Transmission with [PTT] is inhibited when ON is selected to
prevent accidental transmission, etc.
PTT LOCK PTT LOCK
r OFF
ON
D Busy lockout
Turns the busy lockout function ON and OFF.
This function inhibits transmission while receiving a signal or
when the squelch is open.

BUSY LOCKOUT

BUSY LOCKOUT
r OFF
ON
D Time-out timer
To prevent accidental prolonged transmission, etc., the
transceiver has a time-out timer. This function cuts a trans-
mission OFF after 1, 3, 5 or 10 min. of continuous transmis-
sion. This timer can be cancelled.
• OFF : The time-out timer is turned OFF. (default)
• 1 to 10 MIN : The transmission is cut OFF after the set
period elapses.
(default: OFF)
PTT LOCK PTT LOCK
OFF
r ON
(default: OFF)
BUSY LOCKOUT BUSY LOCKOUT
OFF
r ON
MENU SCREEN OPERATION
TIME-OUT TIMER TIME-OUT TIMER
r OFF
1MIN
3MIN
5MIN
10MIN
D Active band
Allows continuous frequency selection of the operating fre-
quency across all bands.
• SINGLE : A single operating frequency can be
selected within the current band. Push
[BAND] for band selection in this case.
• ALL : The operating frequency can be selected
continuously. (default)
ACTIVE BAND ACTIVE BAND
SINGLE
r
ALL
D Dial replace
Exchanging [DIAL] and [VOL] function.
• OFF : The dial replace function is turned OFF.
(default)
• ON : The dial replace function is turned ON.
DIAL REPLACE DIAL REPLACE
r OFF OFF
ON
11
TIME-OUT TIMER TIME-OUT TIMER
OFF
1MIN
3MIN
5MIN
r 10MIN
ACTIVE BAND ACTIVE BAND
r
SINGLE SINGLE
ALL
DIAL REPLACE DIAL REPLACE
OFF
r ON
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
99