Icom IC-92A Instruction Manual page 48

7
DV MODE OPERATION (Optional UT-121 is required for IC-92A)
D Repeater operation in the same zone
q Set the desired repeater's frequency, offset and shift di-
rection in B band.
(pgs. 18, 31)
• Select DV mode in advance. (p. 21)
w Set your own call sign.
• See p. 34 for your own call sign programming.
e Set the desired station call sign.
• See p. 36 for station call sign programming.
r Set the repeater's call sign as follows;
z Enter "R1" in call sign set mode.
➪
❮MENU screen❯
(Push [MENU/ ]) (Rotate [DIAL]
x Rotate [DIAL]
†
to select the nearest repeater's call sign.
c Push [ ](5) to set the call sign for "R1."
• Return to CALL SIGN screen.
v Rotate [DIAL]
†
to select "R2" then push [ ](5)
• RPT2 CALL SIGN screen is displayed.
b Rotate [DIAL]
†
call sign.
same zone)
• Select "NOT USE✱" when not operating RPT2.
n Push [ ](5) to set the call sign for "R2."
• Return to CALL SIGN screen.
CALL SIGN CALL SIGN
r
m Push [MENU/
42
(p. 38)
(p. 39)
➪
❮CALL SIGN❯ ❮R1❯
†
, then push [ ](5)
to select the desired repeater's
UR:CQCQCQ
R1:RPT1AA
R2:NOT USE*
MY:MYCALL
/IC92 /IC92
] to return to frequency indication.
t Push [PTT] to transmit; release to receive.
†
.)
†
.
(in the
[DIAL] ↔ [ ](2)/[ ](8)
†
](5) ↔ [ ](6)
[