Set Mode Items - Icom IC-M73 Instruction Manual

8
SET MODE

■ SET mode items

D Beep tone function
Turns ON the key touch beep sound or AJ, or turns OFF the
sound OFF.
• ON : A fixed beep sounds (default)
• AJ : The preset beeps (example: do, re, mi) sound
• OFF : Silent operation
Beep tone ON (default)
D Weather alert function
For only the USA, EXP, AUS and CHN versions, a NOAA
broadcast station transmits a weather alert tone before any
important weather announcements. When the weather alert
function is turned ON, any detected weather alert will make
the IC-M73/IC-M73EURO activate a blinking "
icon on the function display and repeatedly sound a beep
tone. The blinking and beeping stops when the radio is picked
up and operated. The previously selected weather channel
is checked any time during standby, or while scanning, when
the power save function is activated.
• " " appears when the function is turned ON.
Weather alert function
OFF (default)
26
"
Push
Beep tone OFF
"
" alert
Push
Weather alert function
ON
FELLECS-TECH | inbox@fellecs-tech.com | www.fellecs-tech.com
D Priority scan function
"
Except for the NLD version, the transceiver has 2 scan
types— normal (OFF) and priority (ON) scans. Normal scan
searches all Favorite (TAG) channels in the selected channel
group. Priority scan sequentially searches all Favorite (TAG)
channels while monitoring Channel 16.
• The default setting may differ, depending on the version.
Normal scan (default)
"
D Scan resume timer
Except for the NLD version, the scan resume timer can be set
as a pause (OFF) or timer scan (ON). When OFF is selected,
the scan pauses until a received signal disappears. When ON
is selected, the scan pauses for 5 seconds after receiving a
signal and then resumes even if a signal has been received.
Scan resume timer
OFF (default)
"
Push
Priority scan
"
Push
Scan resume timer
ON
"
"