Mode Selection - Icom IC-92A Instruction Manual

■ Mode selection

D VFO mode
VFO mode is used to set the desired frequency.
➥ Push [VFO] to select VFO mode.
• VFO mode indication
A
A
VFO
L O W LOW
MHz
ATT AT T
What is VFO?
VFO is an abbreviation of Variable Frequency Oscillator. Fre-
quencies for both transmitting and receiving are generated
and controlled by the VFO.
+D U P +DUP D TCS DTCS
FM
PRIO PRI O W X EMR WX EM R
146 010
25 25
Mem oName M em oN am e
P SKIP
µ 000 000
FREQUENCY AND CHANNEL SETTING
D Memory mode
Memory mode is used for operation on memory channels
which store programmed frequencies.
q Push [MR] to select memory mode.
• "μ " appears when memory mode is selected.
• Memory mode indication
LOW LOW
B
ATT ATT
MR
S.MW
w Rotate [DIAL] to select the desired memory channel.
• Only programmed memory channels can be selected.
• Enter the memory channel directly to select the desired memory
channel. (p. 64)
• See p. 66 for memory programming details.
+DUP +DUP DTCS DTCS
FM FM PRIO WX EMR PRIO EMR
433 000
25 25
A
MemoName MemoName
PSKIP
001 001
μ
Appear
4
4
15