Icom IC-92A Instruction Manual page 73

• The recording is paused automatically when the DV signal is
interrupted or when the DV audio signal cannot be received
correctly. Re-starts the recording when the DV audio signal is
received correctly.
t Push [REC] again to stop recording.
• The recording stops automatically when the track becomes full.
➪
❮MENU screen❯ ❮DV VOICE MEMO❯
(Push [MENU/ ]) (Rotate [DIAL]
TRACK
TRACK:1 TRACK:1
r
:SEL :SEL
:BACK CLR:CLR :BACK
DV MODE OPERATION (Optional UT-121 is required for IC-92A)
➪
❮TRACK❯
† †
, then push [ ](5) .)
*
:
CLR:CLR
◆ Track size setting
The track size can be changed with the following instruction.
q Enter "TRACK SIZE" in DV voice memo set mode.
• TRACK SIZE screen is displayed
w Rotate [DIAL]
†
to select the desired track size.
➪
❮MENU screen❯ ❮DV SET MODE❯
(Push [MENU/ ]) (Rotate [DIAL]
10S/3TRACK : Makes 3 tracks and 10 seconds audio
can be recorded in each track.
15S/2TRACK : Makes 2 tracks and 15 seconds audio
can be recorded in each track.
30S/1TRACK : Makes 1 track only and 30 seconds audio
can be recorded in a track.
e Push [ ](5)
to return to DV VOICE MEMO
(or [ ](4))
screen.
r Push [MENU/
] to return to frequency indication.
[DIAL] ↔ [ ](2)/[ ](8)
†
7
➪
❮AUTO DETECT❯
† †
, then push [ ](5) .)
](5) ↔ [ ](6)
[
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
67