Icom IC-92A Instruction Manual page 106

11
MENU SCREEN OPERATION
D GPS TX mode
Sets transmitting position data from connected a GPS re-
ceiver ON and OFF.
When the position information is received from a connected
GPS receiver and the GPS Auto TX Timer setting (p. 95) is
set to a specifi c time, the transceiver automatically transmits
with the current position and message at every setting inter-
val.
• DISABLE : Transmitting position data is disable.
• GPS : Transmitting position data at GPS mode.
• GPS-A : Transmitting position data at GPS-A mode.
GPS TX MODE GPS TX MODE
r DISABLE
GPS
GPS-A
102
(default: DISABLE)
(default)
GPS TX MODE GPS TX MODE
DISABLE DISABLE
GPS
GPS-A
r
:SENTENCE :SENTENCE
• Sentence formatter setting
q Select "GPS" in GPS TX mode item, then push [ ](5)
enter the sentence formatter selection.
w Rotate [DIAL]
† to select the desired sentence formatter.
•- RMC, GGA, GLL, GSA, VTG and GPS are selectable.
GPS SENTENCE GPS SENTENCE
r RMC:OFF
GGA:ON
GLL:OFF GLL:OFF
GSA:OFF
VTG:OFF
e Push [ ](5)
† to enter the desired sentence formatter se-
lection.
r Rotate [DIAL]
† to select the setting.
r
t Rotate [DIAL]
† to select next sentence and repeat steps
w to r, or push [MENU/
dication.
•-Only three sentence formatters can be activated at same time.
[DIAL] ↔ [ ](2)/[ ](8)
†
† to
GPS SENTENCE GPS SENTENCE
RMC:OFF RMC:OFF
r GGA:ON GGA:ON
GLL:OFF GLL:OFF
GSA:OFF GSA:OFF
VTG:OFF VTG:OFF
RMC SENTENCE RMC SENTENCE
OFF
r
ON
] to return to frequency in-
](5) ↔ [ ](6)
[