D Checking The Repeater Input Signal; Off Band Indication - Icom IC-92A Instruction Manual

6
REPEATER AND DUPLEX OPERATIONS

D Checking the repeater input signal

The transceiver can check whether the other station's trans-
mit signal can be received directly or not, by listening on the
repeater input frequency.
➥ Push and hold [SQL] to check whether the other station's
transmit signal can be directly received or not.
• When the other station's signal can be directly received, move
to a non-repeater frequency to use simplex. (duplex OFF)
Blinks while pushing and holding [SQL].
30
Indication while receiving.
-DUP -DUP TONE TONE
FM
145300 145300
A
PSKI PSKIP
Push and hold
Receives –0.6 MHz shift frequency.
-DUP TONE
FM
144 700
A
PSKIP
D Off band indication
If the transmit frequency is out of the amateur band, the off
band indication, "OFF," appears on the display when [PTT]
is pushed. Check the offset frequency or duplex direction in
this case.
(p. 31)
-DUP -DUP TONE TONE
FM
A
OFF OFF
U.S.A. and Korean versions:
Auto repeater function uses standard values of the offset
frequency.
✔-CONVENIENT!
Tone scan function: When you don't know the subaudible
tone used for a repeater, the tone scan is convenient for de-
tecting the tone frequency.
➥ Push and hold [T.SCAN](.) for 1 sec. to start the tone
scan. See p. 112 for more information.
PSKIP PSKI