Operating Band Selection - Icom IC-92A Instruction Manual

4
FREQUENCY AND CHANNEL SETTING
D Call/TV*/Weather
Call channels are used for quick recall of most-often used
frequencies.
* Appears only when TV channels are programmed via the
optional RS-91. Also available for A band operation only.
†
Available for the USA version only.
q Push [CALL] several times to select call channels/TV
channels (A band only)/Weather channels.
•- Call/TV/Weather channels can be selected in sequence.
w Rotate [DIAL] to select the desired channel.
[DIAL]
CALL
RX CS
16
†
channels
• Call channel indication
+DUP +DUP DTCS DTCS
FM PRIO WX PRIO WX EMR EMR
145 000
25
A
MemoName MemoName
P SKIP SKIP
C0
μ
LOW
ATT
• TV channel indication
+DUP +DUP DTCS DTCS
C
WFM WFM PRIO WX PRIO WX EMR EMR
10 ch
25
A
MemoName MemoName
P SKIP SKIP
μ TV
LOW
ATT
• Weather channel indication
+DUP +DUP DTCS DTCS
PRIO PRIO WX WX EMR EMR
1 ch
25
A
MemoName MemoName
P SKIP SKIP
μ WX WX
LOW
ATT

■ Operating band selection

The transceiver can receive the AM broadcast, HF bands,
50 MHz, FM broadcast, VHF air, 144 MHz, 300 MHz, 400
MHz or 800 MHz* bands.
(Some bands are not selectable for B
band operation. See next page for details.
➥ In VFO mode, push [BAND] several times to select the
desired frequency band.
•- If the other than VFO mode is selected, such as a memory
channel/call channel/TV channel/Weather channel, push [VFO]
to select VFO mode first, then push [BAND] to select the de-
sired band.
➥ While pushing and holding [BAND], rotating [DIAL] also
selects frequency band.
[DIAL]
D
BAND
Available frequency bands are different depending on ver-
sion. See the specifi cation for details. (pgs. 120, 121)
* Some frequency ranges are blocked for the USA version
by regulation.
)
+DUP +DUP DTCS DTCS
FM PRIO PRIO WX EMR EMR
145 000
25
A
MemoName MemoName
PSKIP
μ 000 000
LOW LOW
ATT ATT