Frequency And Channel Setting; Main Band Selection - Icom IC-92A Instruction Manual

4

FREQUENCY AND CHANNEL SETTING

■ Main band selection

The IC-92A/92AD has two independent operating bands; A
band and B band
(VFO A)
ate 0.495 MHz to 999.990 MHz*, and B band
operate 118 MHz to 174 MHz and 350 MHz to 470 MHz.
* Some frequency ranges are blocked for the USA version by regula-
tion.
NOTE: When in dualwatch mode, transmission is avail-
able from the MAIN band only.
Single band operation
14
. A band can oper-
(VFO B) (VFO A)
(VFO B)
• Selecting A band
+DUP DTCS
FM PRIO WX EMR
146 010
25 25
A
MemoName MemoName
P SKIP SKIP
μ 000 000
LOW
ATT
Push
• Selecting B band
+DUP +DUP DTCS DTCS
FM FM PRIO WX PRIO WX EMR EMR
440 000
25 25
B
MemoName
P SKIP SKIP
μ 000
LOW
ATT
D How to change the main band
➥ Push [MAIN/DUAL] to toggle between A and B band.
can
➥ Push and hold [MAIN/DUAL] for 1 sec. to turn the dual-
watch operation ON and OFF.
• While in dualwatch operation, the display indicates A band in
the upper half and B band in the lower half.
➥ During dualwatch operation, push [MAIN/DUAL] to select
A band or B band as the main operating band alternately.
Dualwatch operation
• Selecting upper side as main band
+DUP +DUP
146 010
FM FM
+DUP +DUP
440 000 000
FM
Push
for 1 sec.
• Selecting lower side as main band
+DUP +DUP
146 010
FM FM
+DUP +DUP
440 000
FM
DTCS W PS
PRIO PRIO
25
μ 000 000
DTCS W PS
PRIO PRIO EM EM
50
μ 000 000
Push
DTCS W PS
PRIO PRIO
25
μ 000 000
DTCS W PS
PRIO PRIO EM EM
50
μ
000 000