Icom IC-92A Instruction Manual page 32

5
BASIC OPERATION
D Main band selection
➥ Push [MAIN/DUAL] to select A band or B band as the
main operating band alternately.
MAIN
DUAL
26
+DUP +DUP DTCS DTCS W PS PS
146 010 14
PRIO PRIO
μ 000 000
FM
+DUP +DUP DTCS DTCS W PS PS
440 000
PRIO PRIO EM EM
μ 000 000
FM FM
+DUP +DUP DTCS DTCS W PS PS
146 010
PRIO PRIO
μ 000 000
FM
+DUP +DUP DTCS DTCS W PS PS
440 000
PRIO PRIO EM EM
μ 000 000
FM FM
D Setting audio volume
The audio level for dualwatch operation can be adjusted
both on A band and B band simultaneously (default).
This setting can be set separately for each band in sounds
set mode.
q Push and hold [MAIN/DUAL] for 1 sec. to enter the dual-
watch operation, if necessary.
w Rotate [VOL] to adjust the audio level for the main band.
• If squelch is closed, push and hold [SQL] to verify the audio
level.
• The display shows the volume level while setting.
146 010
[VOL]
440 000
VOL VOL
440 000
Setting for A band (upper side)
146 010
VOL VOL
Setting for B band (lower side)
+DUP +DUP DTCS DTCS W PS PS
010
PRIO PRIO
μ 000 000
FM
+DUP +DUP DTCS DTCS W PS PS
PRIO PRIO EM EM
μ 000 000
FM FM
+DUP +DUP DTCS DTCS W PS
PRIO PRIO
146 010 010
25
μ 000 000
+DUP +DUP DTCS DTCS W PS
PRIO PRIO EM EM
75
μ 000 000
FM FM
+DUP +DUP DTCS DTCS W PS PS
PRIO PRIO
25
μ 000 000
FM
+DUP +DUP DTCS DTCS W PS
PRIO PRIO EM EM
440 000
75
μ 000 000