Accessory Attachment; Antenna; Belt Clip; Handstrap - Icom IC-92A Instruction Manual

■ Antenna

Insert the supplied antenna into the
antenna connector and screw down
Jack cover
the antenna as shown at left.
NEVER carr y the transceiver by
holding the antenna.
KEEP the jack cover attached when
jack is not in use to protect the con-
nector from dust and moisture.
✔ For your information
Third-party antennas may increase transceiver perform-
ance. An optional AD-92SMA
is available to connect an antenna with a BNC
ADAPTER
connector.

■ Belt clip

Supplied screws*

ACCESSORY ATTACHMENT

ANTENNA CONNECTOR
*NOTE:
USE the supplied screws
only. Using screws
longer than specified
could damage the

■ Handstrap

Slide the handstrap through the
loop on the top of the belt clip as
illustrated at left to facilitate carrying
the transceiver.
H andstrap

■ Battery pack

Attach the Li-Ion battery pack
as illustrated below.
(BP-216)
• Charge the Li-Ion battery pack before use. (pgs. 10, 11)
1
or battery case
(BP-217)
Battery pack/
q
Battery case
w
Latch
1
1