Rx Call Sign Auto Write - Icom IC-92A Instruction Manual

D Digital monitor
Sets the desired monitoring mode during digital mode op-
eration from "Auto," "Digital" and "Analog."
• AUTO : The transceiver sets monitoring mode to FM
and DV according to the received signal.
fault)
• DIGITAL : Monitors in DV mode.
• ANALOG : Monitors in FM mode.
DIGITAL MONITOR DIGITAL MONITOR
r AUTO
DIGITAL
ANALOG
D Digital repeater setting
When accessing a digital repeater with a call sign different
than is programmed, the repeater call sign can be stored
into "RPT1" and/or "RPT2" automatically by reading the re-
peater's transmission. The stored repeater's call sign can be
re-called when selecting the repeater call sign. (default: ON)
DIGITAL RPT SET DIGITAL RPT SET
OFF
r ON
(de-
DIGITAL MONITOR DIGITAL MONITOR
AUTO AUTO
r DIGITAL DIGITAL
ANALOG ANALOG
DIGITAL RPT SET DIGITAL RPT SET
r OFF
ON
MENU SCREEN OPERATION
D RX call sign auto write
When an individual station call is received, the calling station
call sign can be automatically set in "UR."
RXCALL WRITE RXCALL WRITE
r OFF
AUTO
D Repeater call sign auto write
When accessing a repeater with a call sign different than is
programmed, the repeater call sign can be set into "RPT1"
and/or "RPT2" automatically by reading the repeater's trans-
mission.
RXRPT WRITE RXRPT WRITE
r
OFF
AUTO
The transceiver sets the received repeater call sign for
operation. Therefore, when a different call sign is set for
operation, the previously set repeater call sign will be lost.
11
(default: OFF)
RXCALL WRITE RXCALL WRITE
OFF
r AUTO AUTO
(default: OFF)
RXRPT WRITE RXRPT WRITE
OFF
r AUTO AUTO
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
101