Steering Handlebar; Clutch - KYMCO VENOX 250 Service Manual

2
. INSPECTION/ADJUSTMENT

STEERING HANDLEBAR

Check that the control cables do not interfere
with handlebar rotation.
Raise the front wheel off the ground and
check that the steering handlebar rotates
freely.
If the handlebar moves unevenly, binds, or
has vertical movement, adjust the steering
head bearing.
Torgue:
Steering stem nut: 6.0～8.0kg-m

CLUTCH

Measure the clutch lever free play.
Free Play: 10～20mm
When major adjustment is required, adjust
by turning the adjusting nut on the clutch
cable from the right crankcase cover.
Adjust by loosening the lock nut and turning
the adjusting nut. After adjustment, tighten
the lock nut.
When minor adjustment is required, adjust
by turning the adjusting nut on the clutch
lever side.
Adjusting Nut
Lock Nut
VENOX 250
Lock Nut
Adjusting Nut
2-6