Carburetor Removal - KYMCO VENOX 250 Service Manual

4
. FUEL SYSTEM

CARBURETOR REMOVAL

Remove the seat and fuel tank.
Loosen the air cleaner connecting tube band
screw.
Remove the five lock bolts.
Remove the carburetor cap.
Loosen the throttle cable adjusting nut and
lock nut, and disconnect the throttle cable
from the carburetor.
Loosen the carburetor intake manifold band
screws and then remove the carburetor.
Loosen the drain screw to drain the gasoline
from the float chamber.
Remove the eight inlet duct base lock bolts.
Remove the inlet duct and base.
• Keep sparks and flames away from the
work area.
• Drain gasoline into a clean container.
Screw
Bolt
Air Cleaner
Adjusting Nut
Lock Nut
Throttle Cable
Bolt
VENOX 250
Intake Manifold Band
Base
Inlet Duct
4-4