Operation Instructions; Ignition Switch/Steering Handlebar Lock - KYMCO Quannon 125 Driver Manual

3. OPERATION INSTRUCTIONS

(1) IGNITION SWITCH/STEERING
HANDLEBAR LOCK
NO :At this position, power is connected to start
engine. The key cannot be taken out.
OFF :At this position, power is cut off and the
stops. The key can be taken out.
:At this position, the steering handlebar is
LOCK
The key can be taken out.
《 》
Locking Method
Turn the steering handlebar left to the full and then
and turn the ignition switch key left to the "LOCK"
The handlebar can be locked.
《 》
Unlocking Method
Turn the ignition switch key right to the "OFF" and the "ON"
is released automatically.
CAUTION:
After locking, turn the handlebar gently to make sure
that it is locked.
Do not turn the ignition switch to the "OFF" position during
riding, otherwise the handlebar will be out of control and
cause accidents.
Don't park your motorcycle at a place to hinder the traffic.
the
engine
locked.
push
position,
7