9
. CLUTCH/GEAR SHIFT MECHANISM
CLUTCH PLATE
Measure each clutch plate bending using a
feeler gauge.
Service Limit: 0.10mm replace if over
CLUTCH OUTER
Inspect the clutch outer groove for
scratches caused by the friction disks.
Measure the clutch outer I.D.
Service Limit: 46.5mm replace if OVER
OIL PUMP DRIVE SPROCKET/BUSH
Measure the oil pump drive bush I.D. and
O.D.
Service Limits:
I.D. : 22.20mm replace if over
O.D. : 28.80mm replace if below
Measure the oil pump drive sprocket I.D.
Service Limits:
I.D. : 29.20mm replace if over
INSTALLATION
Install other removed parts in the reverse of
order of removal.
Feeler Gauge
Clutch Outer
VENOX
250
Clutch Plate
9-8