KYMCO VENOX 250 Service Manual page 72

5
. ENGINE REMOVAL/INSTALLATION
SERVICE INFORMATION
GENERAL INSTRUCTIONS
• A engine stand or floor jack is required to support and maneuver the engine.
• The following parts can be serviced with the engine installed in the frame:
⎯ Cylinder head/valves (Section 6)
⎯ Cylinder/piston (Section 7)
⎯ Starter motor/generator/left crankcase cover/starter clutch/camshaft (Section 8)
⎯ Clutch/gear shift mechanism (Section 9)
SPECIFICATIONS
Recommended engine oil: SAE5W50
Engine oil capacity: Capacity: 2.5 liter
Coolant capacity: Radiator: 560cc
Reserve tank: 240cc
Change with oil filter: 2.2 liter
Change without oil filter: 2.0 liter
VENOX 250
5-2