Service Information; Troubleshooting - KYMCO VENOX 250 Service Manual

17
. STARTING SYSTEM

SERVICE INFORMATION

GENERAL INSTRUCTIONS
• The removal of starter motor can be accomplished with the engine installed in the frame.
• When connecting the starting system wires, connect them securely to avoid hard starting due to
poor connection.

TROUBLESHOOTING

Starter motor won't turn
• Fuse burned out
• Weak battery
• Faulty ignition switch
• Faulty starter switch
• Faulty starter relay
• Poorly connected, broken or shorted wire
• Faulty starter motor
• Faulty clutch switch
• Faulty side stand switch
• Side stand is at "down" position
• Engine stop switch is at "stop" position
Lack of power
• Weak battery
• Loose wire or connection
• Foreign matter stuck in starter motor or gear
Starter motor rotates but engine does
not start
• Faulty starter clutch
• Reverse rotation of starter motor
• Weak battery
17-2